SUPER-HIGH PRESSURE CNC WATER-JET CUTTING MACHINE

PART 1. General Specification

PART 2. Standard Accessories

1. Nozzle 2 pc (for water & sand Mixed);
2. Diamond 5 pc (for focusing high-pressure water);
3. Abrasive sand 60 mesh (or 80,100mesh) 500kg;
4. Spare parts for abrasive;
5. Spare parts for hydraulic;
6. Servicing tools to machine;
7. Operation manual in English.

PART 3. Performance Condition

1. Abrasive-mix Nozzle: ID Φ1.02 x Φ6.35 x 76 mm
2. High-pressure Water Diamond: ID Φ0.33 mm
3. Abrasive sand: 60, 80, 100 mesh (20kgs per working hour)
4. Water flow high pressure: 280~380 Mpa (Max. Capability 420Mpa)
5. Distance between nozzle end to work piece: 3~6 mm
6. Auto CAD drawing offset: 0.4~0.5 mm
7. Cutting accuracy: ±0.20 mm

PART 4. Performance Regulation

1. Work piece out of flat and work piece sliding is strictly forbidden!
2. Thickness less than 3mm should put iron block on work piece!
3. Other staff want to operate machine should be approved by Site Technician!

PART 5. Features of Machine parts

1. High Pressure Water-Jet Pump

2 . Working Table (Fly-arm type)

3. Controller & Software& Transducer

4. Cutting head & other

	Description	Parameters
	Orifice diameter (mm)	0.25-0.3
	Mixing tube ID (mm)	0.8 or 1
	Air compressor pressure (MPa)	0.6-0.8
	Abrasive	garnet
	Abrasive granularity (mesh)	60-100

5. Cutting Samples